DIY christmas card tutorial for share

Christmas cards at all times regardless of irreplaceable best Christmas gift because Christmas card itself is relatively simple, unlike the Christmas gift that had to burn brain ready for Christmas cards, as long as ready for their blessings language to OK it. This by Canon launched a free three-dimensional Christmas cards gave us about handmade DIY Christmas cards more choices. After all, sometimes still want to be able to produce and sell Christmas cards out of business Christmas cards can be comparable, and this teddy bear Christmas cards can definitely achieve this effect.

 
What you need:
(1)christmas parper
(2)scissor
(3)cheap christmas ribbon
(4)red ribbon
Instructions:

1. In the specific production process, this is the most critical part of the Teddy Bear Christmas cards assembled, making teddy bears can be freely opened and closed with the greeting card activities. Here all the cards first variable structure tailoring down. Then the first part of the structure of the folded sufficiently so that it can be folded freedom. And the upper green dot where the two rectangular areas with white latex paste, making it fixed. While marked (2) of section also pasted into (a) section above. Note that some of the activities of the folded portion can be fully pre-folded, thus facilitating the ultimate Christmas card pasted to the inside can be free after the sheets together with the greeting card is opened or closed.
2. Then the (6) No. Structural paste into making a good step in front of the structure above, and then paste it into (7) No structure that is the main Christmas greeting card body top. Note the location of the icon in the paste have been marked with a red dot out, according to specific locations marked for folding and pasting can be.
3. This time speaking (3) No part of the overall model is also performed on the paste, note that when the paste teddy bear's body is actually a cross with its arms full attention to this point. Meanwhile the body above the crease where the folding process also, making teddy bears ultimate in Christmas cards when you can open a free open body.
4. First teddy bear's head (5) paste (4) No structure above. Then this combination a good structure and then paste it into the front of the main step in making a good Christmas cards at the end that (4) No. rectangular structure is to be placed behind the teddy bear to go, put in front may revealed the secret. While the other part is illustrated in accordance with the origin and arrows, it can be pasted. Teddy Bear Christmas cards this time have the freedom to open and close and see their freedom of movement in the structure above it.   

DIY tutorial of Making Ribbon Belts

Along with being super straightforward to form, ribbon belts square measure terribly comfy for each kids and adults to wear. creating ribbons belts isn't solely straightforward, however value effective moreover. this text contains a tutorial which will be created by people who square measure thought-about beginners at stitching. Be careful, you'll become dependent on creating multiple ribbon belts in varied colours and styles.

Materials

Roll of 3/8 inch Grosgrain Ribbon
Scissors
2 D-rings
Sewing Machine
Measuring Tape

Instructions:

Step 1 - live the waist of the person for whom you're creating the belt for. Take that measure and add 7- nine inches to that. This total are going to be the length of ribbon that you just ought to cut.

* If you're employing a single strand of ribbon for the belt, skip to Step Four. If you've got chosen 2 strands of ribbon to fuse along for the belt, still Step 2.

Step 2 - Cut a strip of the liquid adhesive that's as long because the length of the ribbon. Follow the directions on the package before ironing along the ribbon and liquid adhesive. Once you've got adhered the 2 sections of ribbon along, pass on to ensuing step.

Step 3 - For further sturdiness, sew a sew that runs down the complete length of the ribbon belt (the prime and bottom).

Step 4 - Place your ribbon belt onto a flat surface (inside of belt facing up) and slip one finish through the flat aspect of the D-rings. The ribbon ought to overlap the D-ring around 1/2". Sew a vertical sew to carry that section in situ. For further security, you'll need to stitch a pair of or three additional stitches over the world.

Step 5: the ultimate step is to heat seal the tip of the ribbon belt to stop fraying. the best approach is to pass the tip of the ribbon through a flame (candle or lighter) terribly quickly. The pass ought to be in one motion from left to right. Please use caution with this step associated confirm an adult performs the warmth seal. Once the ribbon passes through the flame, it'll harden and seal the tip of the ribbon belt.

Tips:
If you are employing a solid color for your ribbon belt, you'll simply use one strip of the cloth ribbon unless you decide on otherwise. In some cases, rolls of cheap christmas ribbon that contain styles don't have the styles written on either side. In these instances, you'll have to settle on another roll of ribbon, probably a solid color, that may go well with the planning you have got chosen. this can be after you would be adhering the 2 strands along. It adds somewhat additional work, however the end result is nice as a result of you finish up with a reversible ribbon belt!

Ribbon Sculpture Instructions

I typically concentrate on headbands made up of cloth flowers and/or feathers. However, I even have seen ribbon sculptures on Etsy et al., and that i assume they're simply manner too cute, thus i made a decision that this may be the proper chance to vary and check out creating one. And what's a lot of summery  than a giant ball of sunny joy….especially on this tiny gal?! Not a lot of.

What you need for this tutorial?

1. yellow ribbon (3/8" wide)
2. french ribbon (1" wide)
3. a hot glue gun and hot glue
4. scissors

Start by cutting your circle of felt. This won't really show. it's the bottom that you simply can glue all of your ribbon onto. Cut no matter size of circle you'd like. I needed mine pretty massive, and, as you'll be able to see, I used my optical lens because the circle type for activity.

Cut lengths of ribbon for your sun rays. Mine were simply over an in. long. Snip a V within the ends of your sun rays. you will wish to use somewhat of Fray Check to seal up the ends of your sun rays.

Use dots of hot glue to secure your sun rays to your felt circle.

Now you're progressing to begin your sun’s body. Begin by employing a dot of hot glue to secure the sting of your ribbon beneath itself so you'll have a pleasant, neat end. currently glue the ribbon to the “top” of the sun.

At the “bottom” comprehend what proportion ribbon length you wish at rock bottom and cut it off. Glue the tip beneath such as you did at the start. Secure it down at the tip with hot glue. Your sun is currently DONE! straightforward peasy, right?

Voila! you're all done! If your very little girl has hair then plow ahead and clip that unhealthy boy on. If not, you'll be able to do what I did and clip that sun onto a fold-over elastic band. Of course, you'll be able to additionally glue it on to the elastic, however i prefer to place it on a clip so it'll work as a baby band currently and a hair clip later.

Tips & warning:

• You can have a try with other colors of ribbon and you can get this discount ribbon from some wholesale ribbon websites.